Viglen VX2000 Guide de l'utilisateur télécharger pdf (Page 17)

- 16 -

6. Sensors

Figure 6-1

Clicking on the Sensors tab of the IPMI View management session in the Viewing Window (as shown

in Figure 6-1) provides you with detailed information on the sensors monitored by the BMC. It shows

the reading of supported voltages and fan speeds and temperatures monitored by the BMC. The current

reading is shown in yellow numbers, the high limits/low limits in red numbers and a description for the

monitoring sensors in blue text beneath the monitoring sensor figures.

Fan speeds have only a low limit, temperatures have only a high limit, and voltages have both high and

low limits.

• Refreshing monitor status

You can configure the IPMI View to automatically refresh the monitoring status periodically by

checking the Auto Refresh check box and selecting the refresh period in seconds in the seconds list. Or,

click the Manual Refresh button to refresh the monitoring status every time you need an update.

• Hide inactive item

IPMI View gets predefined sensor information from the mainboard. Some items may be not installed

for different configurations. For example, there will be no CPU fan if using a passive CPU heatsink,

and only one CPU on a dual CPU mainboard that has only a single CPU installed. The first time the

sensors page is shown, IPMI View will hide inactive items (the default setting) if any. A manager may

change this option later by un-checking the “Hide inactive item” box, as shown in Figure 6-2.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 41 42

Pas de commentaire

Viglen VX2000 Guide de l'utilisateur Page 17